What Is the Best Passive House Design Features?

 

The passive house is an organic standard for energy performance in a structure, which lowers the building’s environmental footprint. It involves ultra-low-energy structures that only use minimal energy for heat, ventilation or cooling. The main components are insulation, windows, doors, and floors.

A parallel to this standard, MINERGIE-E, is in place in Switzerland. The standards are closely related, but there are distinct differences in how they are implemented. MINERGYGIE-E relies on energy efficient appliances and building materials to meet the requirements, whereas MINERGIE-S relies more on reducing electricity consumption and maximizing passive solar energy.

The concept of a low impact design can be compared with minimizing natural resources. This means building a passive house rather than a traditional, high impact one. Passive houses are built in such a way that they do not add to the urban air pollution problem by using fewer energy and materials. These homes help conserve energy consumption while at the same time reducing greenhouse gas emissions.

Low Energy Design: Passive houses take into consideration the environment as well as saving energy. They aim to minimize energy demands and increase energy efficientness. Passive house builders keep in mind that in building a passive house you should not only reduce the energy consumption of the house but also make the house energy efficient enough to meet the needs of its occupants. The purpose of these buildings is to help people save money and to create a more eco-friendly lifestyle. Thus, passive houses incorporate low impact design features that make the house more attractive as well as easy to construct.

Passive House Construction: As far as the construction of a passive house is concerned, a good quality foundation is necessary because it supports the construction process. This is usually made up of non-combustible materials, such as brick or concrete. This is so that the walls of the house do not get damaged by heat and fire. Also, the house must be constructed in a location that is shielded from the elements so that it is safe and fire resistant.

Internal partition: A good passive house has an interior partition to divide the rooms from the exterior. {or floor to ceiling. This serves two purposes. It allows the occupants to have privacy and prevents the rainwater from entering the basement, where hot water is stored.

Structural Support: When the wall is constructed in such a way that it does not add to the overall cost of the house, the cost of the house would be much lower than a traditional one. In the construction of a passive house, the walls and floor need to be reinforced in order to provide structural support. This helps the home withstand changes in climate. Also, the floor needs to be constructed in such a way that it supports the building for long periods of time. This is so that the energy consumption of the house does not increase over a longer period of time.

Floors and Walls: It is important to consider the types of flooring used in a passive house. There are several types of flooring available to suit the needs of different types of occupants. These floors are made out of various materials like cement, wood and stone.

Doors and windows: This is because these are the entrances to the house. Therefore, the use of doors and windows should be efficient. {or else the entire house may be compromised. One of the major benefits of having proper doors and windows is the reduced use of energy while at the same time keeping the occupants comfortable. These doors and windows also help in reducing the temperature inside the house. and thus the use of heating and cooling systems should be kept minimum.

Lighting: This is because many people use these rooms to entertain guests. Therefore, proper lighting is also required. Therefore, proper lighting is an essential feature in any building. The use of natural lighting is recommended so that it helps in reducing heat and hence using less energy.

All these features ensure better performance of passive house than conventional ones. The above features help reduce energy consumption and increase the comfort levels of people inside the house. Thus, the energy cost savings is much greater.

Leave a Reply